geothermal boost

Houston geothermal companies secure more than $45M in DOE funding

The geothermal projects are among 21 selected to receive a total of $99 million in DOE funding. Photo courtesy Fervo Energy

Three Houston-based companies—Fervo Energy, Quaise Energy and XGS Energy—have been selected by the U.S. Department of Energy to advance geothermal technologies and field tests.

Combined, the companies will receive more than $45 million in funding from the DOE's Next-Generation Geothermal Field Tests and Geothermal Resource Characterization and Confirmation initiative. The projects were among 21 selected from around the country to receive a total of $99 million.

Fervo was selected to conduct two projects under the initiative for approximately $20 million in funding. For the first project, the geothermal unicorn, which achieved first power at its flagship geothermal plant last week, will drill and complete enhanced geothermal systems (EGS) wells in Elmore County, Idaho, and will deploy high-temperature seismic monitoring technology at record-high temperatures at or above 200°C.

For the second project, the company will conduct an appraisal drilling campaign at a "high-priority" site in Humboldt County, Nevada, to confirm if the reservoir is suitable for EGS development.

“We are grateful to the Department of Energy for funding these grants. We believe this is a clear indication from the federal government that expanding geothermal energy to new states is a national priority,” Jack Norbeck, CTO and co-founder of Fervo Energy, said in a news release. “We expect this funding to accelerate Fervo’s pipeline and advance the cutting edge of geothermal technologies.”

Fresh off a $180 million Series B, Quaise Energy also received $25 million in DOE funding through the initiative to support its Project Obsidian super hot geothermal plant in Central Oregon. The funding will go toward the analysis of the drilling, stimulation and flow results of the first two wells at the Project Obsidian site, which will help the company optimize its third well on site.

“This DOE support is a recognition of what we are building at Quaise and the progress we are making in the field, including the confirmation well currently being drilled at Project Obsidian,” Carlos Araque, CEO and president of Quaise, said in a release. “Our ambition has always been to make superhot geothermal a commercial reality, and Project Obsidian is where we first deliver on that promise.”

XGS Energy, which recently relocated its headquarters from Palo Alto, California, to Houston, was also selected for an exploration drilling project. The company will drill a deep vertical appraisal well in Socorro County, New Mexico, to determine if the site is a viable source of geothermal energy. XGS had not disclosed a funding estimate at press time.

The full value of the proposed DOE funding is subject to completion of award negotiations, according to Quaise.

Data from these projects will be shared through DOE’s Geothermal Data Repository (GDR), providing valuable information to researchers and stakeholders in the geothermal sector.

“This is an excellent example of how public and private entities can partner together to scale critical energy technologies,” Tim Latimer, CEO and co-founder of Fervo, added in a release. “With this funding, the Department of Energy is making important investments to help Americans across the country gain access to clean, affordable geothermal energy.”

Other geothermal companies and institutions from around the country will complete the 17 remaining projects. They include:

  • Denver-based 400C Energy Inc.
  • Salt Lake City-based AlterG Resources
  • Denver-based DAVINCI EP LLC
  • Anchorage-based GeoAlaska LLC
  • Oklahoma City-based GreenFire Energy Inc.
  • Virginia-based Hexagon Energy LLC
  • Virginia-based INTEK Inc.
  • Chicago-based Invenergy Geothermal Development LLC
  • Massachusetts-based LiPower Geothermal LLC
  • Fort Worth-based Oriah Geothermal LLC
  • Reno-based Raser Power Systems LLC
  • Santa Fe-based San Ildefonso Services LLC
  • Salt Lake City-based The University of Utah
  • Reno-based TLS Geothermics Corp.
  • Salt Lake City-based Zanskar Geothermal and Minerals

Read more about the full list of projects here.

Trending News

A View From HETI

Hertha Metals has broken ground on its new iron and steel “innovation complex." Photos courtesy Hertha Metals

Shortly after announcing a $133.65 Series A funding round, Conroe-based Hertha Metals broke ground Oct. 8 on a $100 million factory that will produce steel-grade and magnet-grade high-purity iron.

Hertha’s Chalyx plant, located in Conroe, will manufacture a total of about 10,000 metric tons per year of magnet-grade and steel-grade high-purity iron. The factory will use Hertha’s single-step process to generate high-purity iron for rare-earth-magnet and steel manufacturers in the U.S.

Hertha says Chalyx will be the first U.S. commercial plant for production of magnet-grade high-purity iron.

Chalyx is being built next to Hertha’s headquarters and its Pi100 pilot plant, which will remain in operation. Chalyx and Pi100 will form the first modern-day iron and steel “innovation complex” in the U.S., the company says.

“I founded Hertha Metals because I believed we could significantly improve how the world makes iron and steel from ore, and that an industry so fundamental to our future still had enormous room for invention,” Laureen Meroueh, founder and CEO of Hertha, said in a press release.

The 4-year-old startup says the Chalyx complex will lay the foundation for its first 500,000-ton-per-year steel mill.

Chalyx’s first priority is making high-purity iron for U.S. manufacturers of rare-earth magnets, Hertha says. These magnets are critical components for electric vehicles, data centers, wind turbines and defense systems.

China produces an estimated 94 percent of high-purity iron for rare-earth magnets, according to Hertha.

Aside from iron for rare-earth magnets, Chalyx will make iron and steel for pilot projects in the steel industry.

The plant is expected to come online in late 2027, with production of magnet-grade high-purity iron starting in early 2028.

Today, Hertha employs 32 people, the company says. Once it’s fully operating, the Chalyx plant will employ about 50 people.

Just ahead of the groundbreaking, Hertha announced the $133.65 million Series A round, co-led by Khosla Ventures and Doerr Capital. The round included a $65 million equity investment from the Pentagon.

“Iron and steel have shaped human progress for thousands of years. And I believe there is still an enormous amount left to invent,” Meroueh said at the groundbreaking ceremony.

Trending News