Houston's KBR to provide tech for Singapore SAF plant

SAF agreement

KBR has been tapped to provide technology for a planned Singapore SAF plant with a production capacity of up to 100,000 tons per year. Photo via LinkedIn

Houston engineering and technology contractor KBR has been picked as the technology provider for what’s expected to be Asia's first commercial-scale ethanol-to-jet sustainable aviation fuel (SAF) plant.

The proposed plant on Jurong Island in Singapore is being developed by Keppel Ltd.’s Infrastructure Division and Aster Chemicals and Energy. KBR will provide technology licensing and Front-End Engineering Design (FEED) services based on its PureSAF technology.

The plant has a planned production capacity of up to 100,000 tons of SAF per year. The plant is subject to final investment decisions and regulatory approvals.

“We are looking forward to working with Keppel and Aster on this key project and to support Singapore’s ambition of becoming Asia’s leading SAF hub and advancing the ongoing efforts to decarbonize the country’s aviation ecosystem,” Stuart Bradie, KBR president and CEO, said in a news release.

According to KBR, its PureSAF Technology can process multiple feedstocks like bioethanol, syngas, carbon dioxide and hydrogen and convert them to SAF, diesel and gasoline.

The technology was developed by Swedish Biofuels AB and commercialized by KBR.

“KBR’s PureSAF is a feedstock-flexible, bankable technology that is designed to deliver a 100% drop in jet fuel, ready to power aircraft without blending,” Bradie added in the news release. “We are constantly innovating our SAF solution to make it compatible with feedstock availability in different regions and to enable the aviation industry to transition to low-carbon jet fuel with a cost-optimized approach.

KBR has also entered into a memorandum of intent with Keppel’s Infrastructure Division, which states that the companies will collaborate again on decarbonization efforts across biofuels, plastic recycling, digitalization via AI, and SAF.

KBR announced in October that it would spin off its Mission Technology Solutions business, nicknamed SpinCo. The scaled-down KBR, nicknamed RemainCo, would concentrate solely on sustainability technology and services designed to reduce carbon emissions and support energy transition efforts. SpinCo named its new CEO and CFO earlier this month.

From Your Site Articles

Houston-headquartered KBR will spin off its Mission Technology Solutions business, while "New KBR" will concentrate solely on sustainability technology. Photo via kbr.com

KBR shifts sustainability focus with planned spinoff

seeing green

Houston-based KBR, a provider of technology and engineering services for government and private-sector customers, is pursuing a tax-free spinoff of its Mission Technology Solutions business as a public company. Following the spinoff, KBR would remain a public company.

The new company, nicknamed SpinCo, would focus on technology and engineering services for the space and national security sectors. The scaled-down KBR, nicknamed RemainCo, would concentrate solely on sustainability technology and services designed to reduce carbon emissions and support energy transition efforts.

According to the company, RemainCo, or New KBR, will is positioned to serve the ammonia and syngas, chemical and petrochemicals, clean refining, and circular economy markets.

Stuart Bradie, chairman, president and CEO of KBR, said that from July 2024 to July 2025, the Mission Technology Solutions segment generated revenue of $5.8 billion. During the same period, the Sustainability Technology Solutions segment posted revenue of $3.7 billion.

KBR has forecast fiscal year 2025 revenue of $8.1 billion, up from $7.7 billion during the previous fiscal year. The company’s 2026 fiscal year starts in January.

In a news release, KBR said SpinCo and the restructured KBR would “deliver long-term profitable growth and value for customers, associates, and shareholders.”

“Our team has successfully built two leading businesses with the necessary scale and strong financial profile to enable us to take this next exciting step,” Bradie told Wall Street analysts.

Over the past decade, Bradie said, KBR has evolved into “a leading provider of differentiated, innovative, up-market science, technology, and engineering solutions with global scale, global reach, and global impact.” The spinoff would create two public companies that’ll “unlock the next phase of value creation,” he added.

Bradie will be chairman, president, and CEO of the newly configured KBR, while Mark Sopp, KBR’s executive vice president and chief financial officer, will transition to oversight of the Mission Technology Solutions spinoff. Effective Jan. 5, Shad Evans will succeed Sopp as CFO of KBR. He currently is KBR’s senior vice president of financial operations.

Bradie said an executive search firm has been hired to identify candidates for the CEO and CFO roles at SpinCo.

The spinoff is expected to be completed in mid- to late 2026.

Ad Placement 300x100

Ad Placement 300x600

CultureMap Emails are Awesome

Property Showcase

Harris County officials seek more local control over data centers

data demands

Three Harris County officials are pushing for greater local control over the development and operation of data centers.

County Attorney Abby Kamin, County Commissioner Lesley Briones and County Commissioner Adrian Garcia recently called for action to give Harris County more power to regulate data centers.

As it stands now, Harris County “has little to no authority” over the construction of data centers, Briones said at a news conference. Harris County has 55 operating, under-construction, or planned data centers, according to a document filed with the county.

Briones outlined four steps being included in the Harris County commissioners’ exploration of potentially tighter local regulation of data centers:

Reviewing what Harris County can and cannot do regarding data centers
Creating a Harris County plan for the upcoming state legislative session aimed at granting more local control over data center construction and operations. State lawmakers would need to approve any changes in local control.
Establishing community “listening” sessions in Harris County about data centers
Notifying Harris County commissioners when a proposed data center seeks permits

Kamin noted Houston and Harris County lack zoning regulations, and the county’s 34 cities set their own zoning rules. Furthermore, she said, Texas Attorney General Ken Paxton has not issued a ruling on whether counties can impose a moratorium on development of data centers.

However, she said, “limited jurisdiction does not mean limited responsibility … New technology is arriving in our communities faster than our laws and institutions can keep up with, whether that’s data centers, AI or even drones.”

The effort by Kamin, Briones, and Garcia follows Gov. Greg Abbott’s recent statewide halt of new environmental and construction permits for data centers. State permitting is frozen until the Electric Reliability Council of Texas (ERCOT) and the Public Utility Commission of Texas complete their review of data centers.

Their initiative also comes amid growing public concern over the amount of electricity and water gobbled up by data centers, as well as residents’ own rising electric and water bills.

Houston-based CenterPoint Energy expects to connect 8 gigawatts of new data-center loads in the Houston area by 2029, with about 4 gigawatts to follow, Kamin said. That, she said, would significantly increase peak power demand.

“No industry should get to monopolize or run roughshod over residents, public safety, and our critical natural resources,” Kamin said.

That being said, Kamin and Briones stressed they take pride in Houston being the Energy Capital of the World and Texas being an economic powerhouse.

“This isn’t about being against technology or new technology, but growth has to go hand in hand with accountability,” Kamin said.

Garcia said he’s open to welcoming data centers as good corporate neighbors, but not without protecting the people who live near these projects.

“I’ll keep an open mind,” he said, “but I want to know what will ultimately be the benefit to the community. And right now, I need tools [to do that].”

Houston bio-based materials co. steps into new sustainable consumer products

a cleaner shoe

A more sustainable shoe can’t be built on a single material swap. From the hard plastics hidden inside a heel to the material covering a sneaker’s upper, footwear is a collection of components—and each presents a different challenge for companies trying to move away from conventional, petroleum-based materials.

Houston-based Rheom Materials wants to change that equation. The biomaterials company has launched a sustainable footwear platform featuring two of its bio-based alternatives: Benree, a biodegradable plastic designed for hard internal components, and ShoraiDura, a durable leather alternative for footwear uppers.

“A shoe is not one material; it is multiple parts working together as a system. Substituting a single material has never moved the needle,” Rheom founder and CEO Zimri Hinshaw said in a news release. “Rheom wants to make it easier for brands to make a positive impact. By providing an assortment of bio-based materials, brands can change the system, not just a swatch of it.”

Benree is Rheom’s alternative to conventional hard plastics used in footwear construction. The company says it is a 100 percent USDA-certified bio-based, biodegradable material with performance comparable to acrylonitrile butadiene styrene (ABS), a widely used engineering plastic.

The material has passed SATRA testing for high-heel applications with Bared Footwear, an Australian footwear brand.

“At Bared, we're constantly on a journey to remove plastic from our shoes. At the same time, our brand won't compromise on quality for the end customer,” Millie Richards, Bared’s head of sustainability, added in the release. “From samples and testing, Rheom has proven to be solving both of those problems for us. We look forward to seeing how they develop as a company and would love to use them in our shoes.”

Rheom says it is also exploring Benree for additional internal components, including toe puffs and heel counters.

Rheom's Benree material was used for a high-heel prototype. Photo courtesy Rheom Materials

The company’s ShoraiDura material addresses another major part of shoe construction: the upper, which must withstand repeated flexing, friction and wear while maintaining its appearance.

Containing about 80 percent bio-based content, ShoraiDura is engineered as a durable leather alternative for footwear. Rheom says the material’s molecular structure is designed to deliver the strength and durability required for demanding applications.

To demonstrate how the material could be used in finished products, Rheom worked with a Los Angeles-based footwear manufacturer to create two prototypes: an athletic sneaker and a textured skater shoe, both featuring ShoraiDura uppers.

The two offerings reflect the company’s broader strategy. Rather than asking brands to evaluate a single material in isolation, Rheom is positioning its platform as a way to explore alternatives across different parts of footwear construction.

The next step is broader industry adoption. Benree’s testing with Bared Footwear and ShoraiDura’s footwear prototypes offer early examples of how the materials could be applied, while commercial use will depend on manufacturers’ evaluations and product-development decisions.

Rheom Materials is a Houston-based biomaterials company developing bio-based alternatives to petrochemical plastics. Its product portfolio includes Shorai, a leather alternative, and Benree, a hard plastic alternative.

The company debuted Shorai at the Houston Livestock Show and Rodeo in 2025 and showed a bio-based "leather" collection in Milan earlier this year. Read more here.

---

This article originally appeared on our sister site, InnovationMap.

Houston solar manufacturer expands facility, production capacity

houston expansion

Solar tracking and manufacturing company PV Hardware USA is increasing its production capacity and expanding its Houston facility in an effort to meet growing demands.

The move marks the company's third expansion in the Houston area in three years. PV Hardware reports a 400 percent surge in national market growth over the past three years, as solar-based projects have been pivotal in energy resilience efforts.

PV Hardware plans to increase the capacity at its Houston facility by 42 percent, according to a news release. With the additional capacity, PV Hardware expects a 35 percent increase in production of pre-assembled parts. The company has not announced whether any additional employees will be hired or the costs of expansion.

In September, the company completed its new dedicated pre-assembly facility, which will help migrate difficult assembly into an easier manufacturing setting. The new pre-assembly area will also assist with streamlined field installation, enhanced schedule predictability and reduction of manual labor.

Citybiz reports that the expansion totals approximately 34,200 square feet.

PV Hardware USA aims to make solar installation more efficient. For large-scale solar projects, PV Hardware USA’s pre-assembly process helps to relieve assembly work done by installation teams. According to PV Hardware USA, it reduces the number of on-site components by 70 percent.

“Traditionally, manufacturers pushed the assembly burden onto the jobsite,” Rodolfo Bitar, vice president of business development for PVH USA, told Renewable Energy Magazine. “We ask a different question: what work can be done more efficiently before the equipment ever leaves the factory? By managing the assembly of 188 loose parts per row in our controlled manufacturing environment, we remove field complexity and make installation highly predictable.”

PV Hardware USA produces single-axis solar trackers made in Texas and has supplied over 52 gigawatts of solar trackers worldwide.

“The expanded presence in Texas underscores a long-term commitment: bringing world-class solar expertise to local American manufacturing, supporting communities, and serving as a reliable partner through the clean energy transition,” the company said in the release.

In July of 2025, the company opened its 95,000-square-foot facility, which was the second Houston location following its initial $30 million U.S. manufacturing facility, which, at 50,000 square feet, is one of America's largest solar tracker manufacturing facilities.

View All Listings

ENERGYCAPITALHTX EMAILS ARE AWESOME