As emerging technology continues to grow electricity load demand, Cloverleaf has identified an opportunity to develop large-scale digital infrastructure sites powered by low-carbon electricity. Photo via Getty Images

Houston energy executives have started a new company dedicated to developing clean-powered infrastructure for the large electric loads.

Cloverleaf Infrastructure, dually headquartered in Houston and Seattle, Washington, announced its launch and $300 million raised from NGP and Sandbrook Capital, two private equity firms. The company's management team also invested in the company.

As emerging technology continues to grow electricity load demand, Cloverleaf has identified an opportunity to develop large-scale digital infrastructure sites powered by low-carbon electricity.

"The rapid growth in demand for electricity to power cloud computing and artificial intelligence poses a major climate risk if fueled by high-emission fossil fuels," David Berry, Cloverleaf's CEO, says in a news release. "However, it's also a major opportunity to catalyze the modernization of the US grid and the transition to a smarter and more sustainable electricity system through a novel approach to development.

"Cloverleaf is committed to making this vision a reality with the support of leading climate investors like Sandbrook and NGP."

Berry, who's based in Houston, previously co-founded and served as CFO at ConnectGen and Clean Line Energy Partners, clean energy and transmission developers. Last year, he co-founded Cloverleaf with Seattle-based Brian Janous and CTO Jonathan Abebe, who most recently held a senior role at the United States Department of Energy. Nur Bernhardt, director of Energy Strategy at Microsoft who's also based in Seattle, rounds out the executive team as vice president.

"The large tech companies have become dominant players in the electricity sector, and they are genuinely determined to power their growth with the lowest possible emissions," Janous, who serves as chief commercial officer, says in the release. "Achieving this objective doesn't depend on disruptive new technologies as much as it does on dedicated teams working hand in hand with utility partners to maximize the use of the clean generation, storage, and other technologies we already have."

Cloverleaf will work with regional U.S. utilities and data center operators to provide clean electricity at scale through strategic investments in transmission, grid interconnection, land, onsite power generation, and electricity storage, per the release.

"The sustainable development of digital infrastructure at scale is fundamentally a technical power problem," Alfredo Marti, partner at Sandbrook, adds. "We have witnessed members of the Cloverleaf team effectively address this challenge for many years through a blend of creativity, specialized engineering, a partnership mindset, and astute capital deployment."

Ad Placement 300x100
Ad Placement 300x600

CultureMap Emails are Awesome

UH study finds Gulf Coast best positioned for emerging carbon removal technology

coastal impact

The Gulf Coast is an ideal spot for deploying a new ocean-based carbon removal technology that uses seawater to capture and store carbon dioxide, according to a new study from the University of Houston.

The study was led by UH Cullen College of Engineering Professor Mim Rahimi and published in Nature’s Communications Sustainability journal. Abdelrahman Refaie, a PhD student at UH, authored the paper. It aimed to develop a plan for implementing an electrochemical marine carbon dioxide removal (e-mCDR) technology that treats seawater to increase the ocean’s ability to absorb and store carbon dioxide from the air.

Currently, oceans absorb about 30 percent of human-produced carbon dioxide emissions each year, according to UH, making it a great natural resource for carbon removal.

The team at UH scouted and analyzed 38 coastal facilities across the U.S.—including power plants, desalination plants, and liquefied natural gas (LNG) terminals—before determining the Gulf Coast as an attractive option. The South Hub, or the Gulf Coast along Texas and Louisiana, ranked the top-performing area for the technology due to the industrial infrastructure, affordable electricity, hydrogen transportation and storage networks.

Other regions like California and the Northeast also scored well due to their clean energy mix and carbon removal potential, according to UH.

“The South hub has one of the highest diversity factors between power plants, desalination and LNG,” Refaie said in a news release. “That means if, logistically, down the road LNG is not open for this implementation, then we have another option in the area. It reduces the risk factor.”

UH says the findings show how companies could commercialize the technology, which could boost coastal economies.

“The question we had wasn’t technical, rather, it was logistical in regard to implementation down the road,” Rahimi said. “This would be a roadmap if a company or the government wants to utilize this technology.”

Rahimi aims to increase awareness about e-mCDR technology and its potential impact. He recently discussed the ocean-centric carbon removal work with members of Congress in March at the Carbon to Sea’s 2026 Hill Day.

“I think faculty at the University of Houston can do more of this kind of work,” Rahimi said in a separate release. “Meeting with Members of Congress gives us a chance to help policymakers better understand the science and engineering happening at our university. That kind of engagement is an important part of moving new technologies forward. It also shows how the work we do on campus can have a real impact on communities beyond the university.”

Japanese company plans $357M solar manufacturing plant in Houston area

coming soon

Japanese solar manufacturing company TOYO Co. Ltd. plans to invest $357 million to bring a 1.5-gigwatt solar cell manufacturing facility to the Houston area.

TOYO’s latest state-of-the-art facility will be co-located at its existing solar module site in Humble, according to a news release from the company. It will produce heterojunction (HJT) solar cells, which are known to be more durable and efficient with a higher heat threshold.

TOYO reports that the new facility will create 400 full-time manufacturing jobs. The project is expected to be completed in 20 months, which includes an initial pilot production.

"Expanding into domestic cell manufacturing is the natural next step in our commitment to creating an integrated onshore solar supply chain from polysilicon to panels," Takahiko Onozuka, chairman and CEO of TOYO, said in the news release. "Co-locating 1.5 GW of HJT cell capacity at our Houston module site significantly optimizes our capital allocation and infrastructure spend.”

TOYO entered the Houston market in 2024 through its acquisition of a majority stake in Solar Plus Technology Texas LLC.

Earlier this year, it began producing solar modules at its 567,140-square-foot plant in Lovett Industrial’s Nexus North Logistics Park. At the time, the company said it planned to expand manufacturing capacity to 6.5 gigawatts.

"The new cell plant reflects TOYO's long-term strategy to build a fully FEOC-compliant domestic manufacturing platform focused on serving the needs of the U.S. utility-scale solar market," Rhone Resch, TOYO's chief strategy officer, added in the release. "By producing premium solar products in the United States, we will be well positioned to meet the market's evolving domestic content requirements while strengthening supply chain security and reliability. Looking ahead, we believe HJT is the optimal technology platform for integrating next-generation perovskite solar cells, which we expect will drive the next major advancement in solar conversion efficiency and support TOYO's long-term technology roadmap.”