another one

Tesla Cybertruck recalled for 5th time within a year, the latest due to rearview display

Tesla has released a free software upgrade to address the issue. Photo via tesla.com

Tesla is recalling more than 27,000 Cybertrucks because the rearview camera image may not activate immediately after shifting into reverse, the fifth recall for the vehicle since it went on sale late last year.

Tesla has released a free software upgrade to address the issue and owner notification letters are expected to be mailed Nov. 25.

Cybertruck owners have had to deal with a series of recalls since the vehicle went on sale in November. In June, there was a recall to fix problems with trim pieces that can come loose and front windshield wipers that can fail. Two months before that, some Cybertrucks were recalled because the accelerator pedal could stick.

In the most recent recall, the company notified the National Highway Traffic Safety Administration that the display screens in the trucks may remain blank for up to 8 seconds after a driver shifts to reverse. The U.S. requires those screens to activate with a rearview within 2 seconds of shifting into reverse.

The Cybertruck was recalled twice in June to fix problems with trim pieces that can come loose and front windshield wipers that can fail. It has been recalled four times since its introduction. In August in the Baytown area of Chambers County, a Cybertruck was heading down a parkway when it left the road for an unknown reason, hit a concrete culvert and went up in flames. The National Highway Traffic Safety Administration is looking into the crash.

Elon Musk's Tesla delivered the first dozen or so of its futuristic Cybertruck pickups to customers in November, two years behind the original schedule.

Owners may contact Tesla customer service at 1-877-798-3752 or the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 or go to www.nhtsa.gov.

Trending News

A View From HETI

UH's $44 million RAD Center is the first mass timber building on campus with a dramatically lower carbon footprint compared to other buildings of its kind. Photo via uh.edu.

The University of Houston recently completed assessments on year one of the first mass timber project on campus, and the results show it has had a major impact.

Known as the Retail, Auxiliary, and Dining Center, or RAD Center, the $44 million building showed an 84 percent reduction in predicted energy use intensity, a measure of how much energy a building uses relative to its size, compared to similar buildings. Its Global Warming Potential rating, a ratio determined by the Intergovernmental Panel on Climate Change, shows a 39 percent reduction compared to the benchmark for other buildings of its type.

In comparison to similar structures, the RAD Center saved the equivalent of taking 472 gasoline-powered cars driven for one year off the road, according to architecture firm Perkins & Will.

The RAD Center was created in alignment with the AIA 2030 Commitment to carbon-neutral buildings, designed by Perkins & Will and constructed by Houston-based general contractor Turner Construction.

Perkins & Will’s work reduced the building's carbon footprint by incorporating lighter mass timber structural systems, which allowed the RAD Center to reuse the foundation, columns and beams of the building it replaced. Reused elements account for 45 percent of the RAD Center’s total mass, according to Perkins & Will.

Mass timber is considered a sustainable alternative to steel and concrete construction. The RAD Center, a 41,000-square-foot development, replaced the once popular Satellite, which was a food, retail and hangout center for students on UH’s campus near the Science & Research Building 2 and the Jack J. Valenti School of Communication.

The RAD Center uses more than a million pounds of timber, which can store over 650 metric tons of CO2. Aesthetically, the building complements the surrounding campus woodlands and offers students a view both inside and out.

“Spaces are designed to create a sense of serenity and calm in an ecologically-minded environment,” Diego Rozo, a senior project manager and associate principal at Perkins & Will, said in a news release. “They were conceptually inspired by the notion of ‘unleashing the senses’ – the design celebrating different sights, sounds, smells and tastes alongside the tactile nature of the timber.”

In addition to its mass timber design, the building was also part of an Energy Use Intensity (EUI) reduction effort. It features high-performance insulation and barriers, natural light to illuminate a building's interior, efficient indoor lighting fixtures, and optimized equipment, including HVAC systems.

The RAD Center officially opened Phase I in Spring 2024. The third and final phase of construction is scheduled for this summer, with a planned opening set for the fall.

Trending News