ADVERTISEABOUT USSUBMIT A STORYSUBSCRIBETERMS OF USEPRIVACY POLICY
Visit our family of Brands

Houston researcher dives into accessibility of public EV charging stations

EV equity

Research from Rice University of 20 U.S. cities shows that income was linked to who benefits most from public EV infrastructure. Photo by Andrew Roberts/Unsplash

A Rice University professor wants to redraw the map for the placement of electric vehicle charging stations to level the playing field for access to EV power sources.

Xinwu Qian, assistant professor of civil and environmental engineering at Rice, is leading research to rethink where EV charging stations should be installed so that they’re convenient for all motorists going about their day-to-day activities.

“Charging an electric vehicle isn’t just about plugging it in and waiting — it takes 30 minutes to an hour even with the fastest charger — therefore, it’s an activity layered with social, economic, and practical implications,” Qian says on Rice’s website. “While we’ve made great strides in EV adoption, the invisible barriers to public charging access remain a significant challenge.”

According to Qian’s research, public charging stations are more commonly located near low-income households, as these residents are less likely to afford or enjoy access to at-home charging. However, these stations are often far from where they conduct everyday activities.

The Rice report explains that, in contrast, public charging stations are geographically farther from affluent suburban areas. However, they often fit more seamlessly into these residents' daily schedules. As a result, low-income communities face an opportunity gap, where public charging may exist in theory but is less practical in reality.

A 2024 study led by Qian analyzed data from over 28,000 public EV charging stations and 5.5 million points across 20 U.S. cities.

“The findings were stark: Income, rather than proximity, was the dominant factor in determining who benefits most from public EV infrastructure,” Qian says.

“Wealthier individuals were more likely to find a charging station at places they frequent, and they also had the flexibility to spend time at those places while charging their vehicles,” he adds. “Meanwhile, lower-income communities struggled to integrate public charging into their routines due to a compounded issue of shorter dwell times and less alignment with daily activities.”

To make matters worse, businesses often target high-income people when they install charging stations, Qian’s research revealed.

“It’s a sad reality,” Qian said. “If we don’t address these systemic issues now, we risk deepening the divide between those who can afford EVs and those who can’t.”

A grant from the National Science Foundation backs Qian’s further research into this subject. He says the public and private sectors must collaborate to address the inequity in access to public charging stations for EVs.

From Your Site Articles
Ad Placement 300x100
Ad Placement 300x600

CultureMap Emails are Awesome

Property Showcase

Harris County officials seek more local control over data centers

data demands

Three Harris County officials are pushing for greater local control over the development and operation of data centers.

County Attorney Abby Kamin, County Commissioner Lesley Briones and County Commissioner Adrian Garcia recently called for action to give Harris County more power to regulate data centers.

As it stands now, Harris County “has little to no authority” over the construction of data centers, Briones said at a news conference. Harris County has 55 operating, under-construction, or planned data centers, according to a document filed with the county.

Briones outlined four steps being included in the Harris County commissioners’ exploration of potentially tighter local regulation of data centers:

  • Reviewing what Harris County can and cannot do regarding data centers
  • Creating a Harris County plan for the upcoming state legislative session aimed at granting more local control over data center construction and operations. State lawmakers would need to approve any changes in local control.
  • Establishing community “listening” sessions in Harris County about data centers
  • Notifying Harris County commissioners when a proposed data center seeks permits

Kamin noted Houston and Harris County lack zoning regulations, and the county’s 34 cities set their own zoning rules. Furthermore, she said, Texas Attorney General Ken Paxton has not issued a ruling on whether counties can impose a moratorium on development of data centers.

However, she said, “limited jurisdiction does not mean limited responsibility … New technology is arriving in our communities faster than our laws and institutions can keep up with, whether that’s data centers, AI or even drones.”

The effort by Kamin, Briones, and Garcia follows Gov. Greg Abbott’s recent statewide halt of new environmental and construction permits for data centers. State permitting is frozen until the Electric Reliability Council of Texas (ERCOT) and the Public Utility Commission of Texas complete their review of data centers.

Their initiative also comes amid growing public concern over the amount of electricity and water gobbled up by data centers, as well as residents’ own rising electric and water bills.

Houston-based CenterPoint Energy expects to connect 8 gigawatts of new data-center loads in the Houston area by 2029, with about 4 gigawatts to follow, Kamin said. That, she said, would significantly increase peak power demand.

“No industry should get to monopolize or run roughshod over residents, public safety, and our critical natural resources,” Kamin said.

That being said, Kamin and Briones stressed they take pride in Houston being the Energy Capital of the World and Texas being an economic powerhouse.

“This isn’t about being against technology or new technology, but growth has to go hand in hand with accountability,” Kamin said.

Garcia said he’s open to welcoming data centers as good corporate neighbors, but not without protecting the people who live near these projects.

“I’ll keep an open mind,” he said, “but I want to know what will ultimately be the benefit to the community. And right now, I need tools [to do that].”

Houston bio-based materials co. steps into new sustainable consumer products

a cleaner shoe

A more sustainable shoe can’t be built on a single material swap. From the hard plastics hidden inside a heel to the material covering a sneaker’s upper, footwear is a collection of components—and each presents a different challenge for companies trying to move away from conventional, petroleum-based materials.

Houston-based Rheom Materials wants to change that equation. The biomaterials company has launched a sustainable footwear platform featuring two of its bio-based alternatives: Benree, a biodegradable plastic designed for hard internal components, and ShoraiDura, a durable leather alternative for footwear uppers.

“A shoe is not one material; it is multiple parts working together as a system. Substituting a single material has never moved the needle,” Rheom founder and CEO Zimri Hinshaw said in a news release. “Rheom wants to make it easier for brands to make a positive impact. By providing an assortment of bio-based materials, brands can change the system, not just a swatch of it.”

Benree is Rheom’s alternative to conventional hard plastics used in footwear construction. The company says it is a 100 percent USDA-certified bio-based, biodegradable material with performance comparable to acrylonitrile butadiene styrene (ABS), a widely used engineering plastic.

The material has passed SATRA testing for high-heel applications with Bared Footwear, an Australian footwear brand.

“At Bared, we're constantly on a journey to remove plastic from our shoes. At the same time, our brand won't compromise on quality for the end customer,” Millie Richards, Bared’s head of sustainability, added in the release. “From samples and testing, Rheom has proven to be solving both of those problems for us. We look forward to seeing how they develop as a company and would love to use them in our shoes.”

Rheom says it is also exploring Benree for additional internal components, including toe puffs and heel counters.

Rheom's Benree material was used for a high-heel prototype. Photo courtesy Rheom Materials

The company’s ShoraiDura material addresses another major part of shoe construction: the upper, which must withstand repeated flexing, friction and wear while maintaining its appearance.

Containing about 80 percent bio-based content, ShoraiDura is engineered as a durable leather alternative for footwear. Rheom says the material’s molecular structure is designed to deliver the strength and durability required for demanding applications.

To demonstrate how the material could be used in finished products, Rheom worked with a Los Angeles-based footwear manufacturer to create two prototypes: an athletic sneaker and a textured skater shoe, both featuring ShoraiDura uppers.

The two offerings reflect the company’s broader strategy. Rather than asking brands to evaluate a single material in isolation, Rheom is positioning its platform as a way to explore alternatives across different parts of footwear construction.

The next step is broader industry adoption. Benree’s testing with Bared Footwear and ShoraiDura’s footwear prototypes offer early examples of how the materials could be applied, while commercial use will depend on manufacturers’ evaluations and product-development decisions.

Rheom Materials is a Houston-based biomaterials company developing bio-based alternatives to petrochemical plastics. Its product portfolio includes Shorai, a leather alternative, and Benree, a hard plastic alternative.

The company debuted Shorai at the Houston Livestock Show and Rodeo in 2025 and showed a bio-based "leather" collection in Milan earlier this year. Read more here.

---

This article originally appeared on our sister site, InnovationMap.

Houston solar manufacturer expands facility, production capacity

houston expansion

Solar tracking and manufacturing company PV Hardware USA is increasing its production capacity and expanding its Houston facility in an effort to meet growing demands.

The move marks the company's third expansion in the Houston area in three years. PV Hardware reports a 400 percent surge in national market growth over the past three years, as solar-based projects have been pivotal in energy resilience efforts.

PV Hardware plans to increase the capacity at its Houston facility by 42 percent, according to a news release. With the additional capacity, PV Hardware expects a 35 percent increase in production of pre-assembled parts. The company has not announced whether any additional employees will be hired or the costs of expansion.

In September, the company completed its new dedicated pre-assembly facility, which will help migrate difficult assembly into an easier manufacturing setting. The new pre-assembly area will also assist with streamlined field installation, enhanced schedule predictability and reduction of manual labor.

Citybiz reports that the expansion totals approximately 34,200 square feet.

PV Hardware USA aims to make solar installation more efficient. For large-scale solar projects, PV Hardware USA’s pre-assembly process helps to relieve assembly work done by installation teams. According to PV Hardware USA, it reduces the number of on-site components by 70 percent.

“Traditionally, manufacturers pushed the assembly burden onto the jobsite,” Rodolfo Bitar, vice president of business development for PVH USA, told Renewable Energy Magazine. “We ask a different question: what work can be done more efficiently before the equipment ever leaves the factory? By managing the assembly of 188 loose parts per row in our controlled manufacturing environment, we remove field complexity and make installation highly predictable.”

PV Hardware USA produces single-axis solar trackers made in Texas and has supplied over 52 gigawatts of solar trackers worldwide.

“The expanded presence in Texas underscores a long-term commitment: bringing world-class solar expertise to local American manufacturing, supporting communities, and serving as a reliable partner through the clean energy transition,” the company said in the release.

In July of 2025, the company opened its 95,000-square-foot facility, which was the second Houston location following its initial $30 million U.S. manufacturing facility, which, at 50,000 square feet, is one of America's largest solar tracker manufacturing facilities.

View All Listings