UH's $44 million mass timber building slashed energy use in first year

building up

UH's $44 million RAD Center is the first mass timber building on campus with a dramatically lower carbon footprint compared to other buildings of its kind. Photo via uh.edu.

The University of Houston recently completed assessments on year one of the first mass timber project on campus, and the results show it has had a major impact.

Known as the Retail, Auxiliary, and Dining Center, or RAD Center, the $44 million building showed an 84 percent reduction in predicted energy use intensity, a measure of how much energy a building uses relative to its size, compared to similar buildings. Its Global Warming Potential rating, a ratio determined by the Intergovernmental Panel on Climate Change, shows a 39 percent reduction compared to the benchmark for other buildings of its type.

In comparison to similar structures, the RAD Center saved the equivalent of taking 472 gasoline-powered cars driven for one year off the road, according to architecture firm Perkins & Will.

The RAD Center was created in alignment with the AIA 2030 Commitment to carbon-neutral buildings, designed by Perkins & Will and constructed by Houston-based general contractor Turner Construction.

Perkins & Will’s work reduced the building's carbon footprint by incorporating lighter mass timber structural systems, which allowed the RAD Center to reuse the foundation, columns and beams of the building it replaced. Reused elements account for 45 percent of the RAD Center’s total mass, according to Perkins & Will.

Mass timber is considered a sustainable alternative to steel and concrete construction. The RAD Center, a 41,000-square-foot development, replaced the once popular Satellite, which was a food, retail and hangout center for students on UH’s campus near the Science & Research Building 2 and the Jack J. Valenti School of Communication.

The RAD Center uses more than a million pounds of timber, which can store over 650 metric tons of CO2. Aesthetically, the building complements the surrounding campus woodlands and offers students a view both inside and out.

“Spaces are designed to create a sense of serenity and calm in an ecologically-minded environment,” Diego Rozo, a senior project manager and associate principal at Perkins & Will, said in a news release. “They were conceptually inspired by the notion of ‘unleashing the senses’ – the design celebrating different sights, sounds, smells and tastes alongside the tactile nature of the timber.”

In addition to its mass timber design, the building was also part of an Energy Use Intensity (EUI) reduction effort. It features high-performance insulation and barriers, natural light to illuminate a building's interior, efficient indoor lighting fixtures, and optimized equipment, including HVAC systems.

The RAD Center officially opened Phase I in spring 2024. The third and final phase of construction is scheduled for this summer, with a planned opening set for the fall.

From Your Site Articles

Ad Placement 300x100

Ad Placement 300x600

CultureMap Emails are Awesome

Property Showcase

Texas awards $73M for Houston-area grid resilience project

grid funding

Texas Gov. Gregg Abbott announced millions in funding for energy resilience projects around this state this week, with one major project set to impact the greater Houston area.

As part of the Texas Energy Fund's Outside of ERCOT Grant Program, the state announced a roughly $73 million agreement with the Sam Houston Electric Cooperative to replace and upgrade more than 9,000 electric poles and improve other equipment in Montgomery, Liberty and Hardin counties. The agreement is the first for the fund's Outside of ERCOT Grant Program, which supports state projects outside of the state's largest grid.

The multibillion-dollar Texas Energy Fund aims to "finance the construction, maintenance, and modernization of electric facilities across Texas." It was approved by voters in 2023. Other programs within the fund include the:

In-ERCOT Generation Loan Program
Completion Bonus Grant Program
Texas Backup Power Package Program

“The Texas Energy Fund delivers real results for Texans and strengthens the electric systems that families, businesses, and communities depend on,” Abbott said in a news release. “This grant to Sam Houston Electric Cooperative will replace thousands of vulnerable utility poles to better withstand severe weather and ensure a more reliable and resilient grid in East Texas.”

The Houston-area project, nicknamed Steel Anchor, is expected to be completed by June 2031. According to the release from the governor's office, the Sam Houston Electric Cooperative’s territory is one of the most hurricane-prone service areas in the state. The cooperative serves more than 38,000 Texas consumers

“Over the past decade, Sam Houston EC has strategically replaced poles to improve the strength of its electricity distribution system. This grant will boost the Cooperative’s ongoing grid-hardening and resiliency program,” Doug Turk, CEO of the Sam Houston Electric Cooperative, added in the release.

Following the announcement of the Sam Houston funding, Abbott's office also awarded another $200 million from the Outside of ERCOT Grant Program to upgrade approximately 700 miles of power equipment in Northeast Texas. The equipment is operated by Southwestern Electric Power Company, which serves more than 192,000 Texas consumers. The project will include improvements to 200 circuits, replacing aging copper wire with aluminum alloy conductors and replacing existing utility poles.

Additionally, the state announced its seventh Texas Energy Fund loan agreement for a 570 megawatt natural gas power plant in Sherman, Texas. The 20-year loan of up to $411 million is between the Public Utility Commission of Texas and Rayburn Electric Cooperative and is part of the fund's In-ERCOT Generation Loan Program. Rayburn will build the facility near its existing Rayburn Energy Station 1 in the Texoma region. It will connect to the ERCOT North Load Zone.

“When Texas voters overwhelmingly approved the Texas Energy Fund, they gave us a mandate to secure new, reliable power generation for Texas,” PUCT Chairman Thomas Gleeson added in a release. “The TxEF is delivering on that promise, and Rayburn Electric Cooperative’s new 570 MW power plant is proof. We are ensuring Texas families and businesses have power they can depend on for years to come.”

Solar manufacturer announces massive new facility in Houston area

coming soon

SEG Solar has announced plans to open a new 1.15 million-square-foot solar module facility in Tomball—its third in the Houston area.

The news comes just weeks after the Houston-based solar manufacturer announced its second facility, which will be located in Cypress. It’s expected to open in August.

The latest 4.6-gigawatt facility in Tomball will include an assembly factory and a warehouse. Construction is slated to wrap in March 2027, with commercial panel production planned to begin in May 2027. Once completed, the facility will bring SEG’s annual U.S. module manufacturing capacity to 10.6 gigawatts, according to a news release from the company, one of the largest totals in the country.

The facility will produce heterojunction technology (HJT) modules, which the company says will add to the number of n-type solar panels made in the U.S. HJT modules are known to be more durable and are well suited for hotter climates.

“Designed to support next-generation HJT technology and FEOC-compliant production, the facility ensures reliable, high-efficiency solar solutions,” Raymond Bailey, sales manager at SEG Solar, said in a LinkedIn post. “ Alongside upstream integration in Indonesia and potential U.S. cell manufacturing, we are strengthening supply chain resilience amid evolving trade policies.”

SEG opened its $60 million, 250,000-square-foot facility in Houston in 2024 to house its production workshops, raw material warehouses, administrative offices, finished goods warehouses, and supporting infrastructure. The continued expansion is part of SEG’s long-term goal of becoming one of the largest 100 percent U.S.-owned module manufacturers.

Houston chemical co. completes successful field trial of cleaner natural gas processing tech

successful trial

Houston-based Merichem Technologies has announced successful results from the field trial of its new hydrogen sulfide (H2S) removal technology in the Permian Basin.

The technology, known as ECOTREAT, removed more than 99 percent of hydrogen sulfide gas from natural gas streams, or “sour gas,” without producing solid waste during the month-long trial. It also showed sustained performance even when operating above the unit’s design capacity, according to a news release.

“The industry is continually seeking to reduce both the price and complexity of removing hydrogen sulfide from gas production, especially since oil production has shifted to increasingly sour sources, higher gas ratios, and higher water ratios,” Jeff Gomach, SVP, Merichem Technologies, said in a news release. “ECOTREAT met all its field trial objectives and provides a highly effective method for removing hydrogen sulfide to prevent equipment corrosion, ensure worker safety, meet environmental regulations, and maintain product quality for transport.

H2S found in natural gas can turn the gas toxic or hazardous and lead to corrosion in pipelines and processing equipment. However, standard H2S removal technologies create high levels of solid waste. ECOTREAT resolves many of those issues by using an aqueous-phase proprietary catalytic process that converts H2S into dissolved thiosulfate.

Next, Merichem says it plans to move the technology out of the pilot stage to full-scale commercialization.

Merichem, an 80-plus-year-old company, initially launched as a soap and industrial cleaning company. It eventually transitioned to focus on energy technology.

In 2024, Black Bay Energy acquired a portion of Merichem Process Technologies and Merichem Catalyst Products, which would become Merichem Technologies.

View All Listings

ENERGYCAPITALHTX EMAILS ARE AWESOME