Helix Earth's technology has the potential to cut AC energy use by up to 50 percent. Photo by Sergei A/Pexels

Renewable equipment manufacturer Helix Earth Technologies is one of three Houston-based companies to secure federal funding through the Small Business Innovation Research (SBIR) Phase II grant program in recent months.

The company—which was founded based on NASA technology, spun out of Rice University and has been incubated at Greentown Labs—has received approximately $1.2 million from the National Science Foundation to develop its high-efficiency retrofit dehumidification systems that aim to reduce the energy consumption of commercial AC units. The company reports that its technology has the potential to cut AC energy use by up to 50 percent.

"This award validates our vision and propels our impact forward with valuable research funding and the prestige of the NSF stamp of approval," Rawand Rasheed, Helix CEO and founder, shared in a LinkedIn post. "This award is a reflection our exceptional team's grit, expertise, and collaborative spirit ... This is just the beginning as we continue pushing for a sustainable future."

Two other Houston-area companies also landed $1.2 million in NSF SBIR Phase II funding during the same period:

  • Resilitix Intelligence, a disaster AI startup that was founded shortly after Hurricane Harvey, that works to "reduce the human and economic toll of disasters" by providing local and state organizations and emergency response teams with near-real-time, AI-driven insights to improve response speed, save lives and accelerate recovery
  • Conroe-based Fluxworks Inc., founded in 2021 at Texas A&M, which provides magnetic gear technology for the space industry that has the potential to significantly enhance in-space manufacturing and unlock new capabilities for industries by allowing advanced research and manufacturing in microgravity

The three grants officially rolled out in early September 2025 and are expected to run through August 2027, according to the NSF. The SBIR Phase II grants support in-depth research and development of ideas that showed potential for commercialization after receiving Phase I grants from government agencies.

However, congressional authority for the program, often called "America's seed fund," expired on September 30, 2025, and has stalled since the recent government shutdown. Government agencies cannot issue new grants until Congress agrees on a path forward. According to SBIR.gov, "if no further action is taken by Congress, federal agencies may not be able to award funding under SBIR/STTR programs and SBIR/STTR solicitations may be delayed, cancelled, or rescinded."

Ad Placement 300x100
Ad Placement 300x600

CultureMap Emails are Awesome

UH study finds Gulf Coast best positioned for emerging carbon removal technology

coastal impact

The Gulf Coast is an ideal spot for deploying a new ocean-based carbon removal technology that uses seawater to capture and store carbon dioxide, according to a new study from the University of Houston.

The study was led by UH Cullen College of Engineering Professor Mim Rahimi and published in Nature’s Communications Sustainability journal. Abdelrahman Refaie, a PhD student at UH, authored the paper. It aimed to develop a plan for implementing an electrochemical marine carbon dioxide removal (e-mCDR) technology that treats seawater to increase the ocean’s ability to absorb and store carbon dioxide from the air.

Currently, oceans absorb about 30 percent of human-produced carbon dioxide emissions each year, according to UH, making it a great natural resource for carbon removal.

The team at UH scouted and analyzed 38 coastal facilities across the U.S.—including power plants, desalination plants, and liquefied natural gas (LNG) terminals—before determining the Gulf Coast as an attractive option. The South Hub, or the Gulf Coast along Texas and Louisiana, ranked the top-performing area for the technology due to the industrial infrastructure, affordable electricity, hydrogen transportation and storage networks.

Other regions like California and the Northeast also scored well due to their clean energy mix and carbon removal potential, according to UH.

“The South hub has one of the highest diversity factors between power plants, desalination and LNG,” Refaie said in a news release. “That means if, logistically, down the road LNG is not open for this implementation, then we have another option in the area. It reduces the risk factor.”

UH says the findings show how companies could commercialize the technology, which could boost coastal economies.

“The question we had wasn’t technical, rather, it was logistical in regard to implementation down the road,” Rahimi said. “This would be a roadmap if a company or the government wants to utilize this technology.”

Rahimi aims to increase awareness about e-mCDR technology and its potential impact. He recently discussed the ocean-centric carbon removal work with members of Congress in March at the Carbon to Sea’s 2026 Hill Day.

“I think faculty at the University of Houston can do more of this kind of work,” Rahimi said in a separate release. “Meeting with Members of Congress gives us a chance to help policymakers better understand the science and engineering happening at our university. That kind of engagement is an important part of moving new technologies forward. It also shows how the work we do on campus can have a real impact on communities beyond the university.”

Japanese company plans $357M solar manufacturing plant in Houston area

coming soon

Japanese solar manufacturing company TOYO Co. Ltd. plans to invest $357 million to bring a 1.5-gigwatt solar cell manufacturing facility to the Houston area.

TOYO’s latest state-of-the-art facility will be co-located at its existing solar module site in Humble, according to a news release from the company. It will produce heterojunction (HJT) solar cells, which are known to be more durable and efficient with a higher heat threshold.

TOYO reports that the new facility will create 400 full-time manufacturing jobs. The project is expected to be completed in 20 months, which includes an initial pilot production.

"Expanding into domestic cell manufacturing is the natural next step in our commitment to creating an integrated onshore solar supply chain from polysilicon to panels," Takahiko Onozuka, chairman and CEO of TOYO, said in the news release. "Co-locating 1.5 GW of HJT cell capacity at our Houston module site significantly optimizes our capital allocation and infrastructure spend.”

TOYO entered the Houston market in 2024 through its acquisition of a majority stake in Solar Plus Technology Texas LLC.

Earlier this year, it began producing solar modules at its 567,140-square-foot plant in Lovett Industrial’s Nexus North Logistics Park. At the time, the company said it planned to expand manufacturing capacity to 6.5 gigawatts.

"The new cell plant reflects TOYO's long-term strategy to build a fully FEOC-compliant domestic manufacturing platform focused on serving the needs of the U.S. utility-scale solar market," Rhone Resch, TOYO's chief strategy officer, added in the release. "By producing premium solar products in the United States, we will be well positioned to meet the market's evolving domestic content requirements while strengthening supply chain security and reliability. Looking ahead, we believe HJT is the optimal technology platform for integrating next-generation perovskite solar cells, which we expect will drive the next major advancement in solar conversion efficiency and support TOYO's long-term technology roadmap.”