Through an acquisition, Equinor has joined a joint venture carbon capture and storage project in southeast Texas. Image via Getty Images

A Norwegian energy company with its United States headquarters in Houston has announced it has acquired a significant chunk of a carbon capture and storage joint venture.

Equinor now owns a 25 percent interest in Bayou Bend CCS LLC, which is reported to be one of the largest domestic carbon capture and storage projects. The project — a JV between Chevron, Talos Energy Inc., and now Equinor, is located along the Gulf Coast in southeast Texas. The terms of the deal were not disclosed.

“Commercial CCS solutions are critical for hard-to-abate industries to meet their climate ambitions while maintaining their activity," Grete Tveit, senior vice president for Low Carbon Solutions in Equinor, says in a news release. "Entering Bayou Bend strengthens our low carbon solutions portfolio and supports our ambition to mature and develop 15-30 million tonnes of equity CO2 transport and storage capacity per year by 2035. Our experience from developing carbon storage projects can help advance decarbonization efforts in one of the largest industrial corridors in the US."

According to Equinor, it purchased its share through the acquisition of Carbonvert's subsidiary, Texas Carbon 1 LLC. Chevron, the operator, holds 50 percent interest, and Talos holds the other 25 percent interest.

“We look forward to working together with our partners to further mature this exciting project. Bayou Bend is Equinor’s first announced low carbon solutions project on the Gulf Coast. Alongside our upstream production and offshore wind developments, we’re strengthening our position as a broad energy company and expanding our footprint in the Gulf region,” Chris Golden, senior vice president and US Country Manager, says in the release. "Bayou Bend is a significant milestone towards growing our low carbon portfolio in the US.”

With about 140,000 gross acres of pore space for permanent CO2 sequestration and over one billion metric tons of gross potential storage resources, according to the release, Bayou Bend is positioned to be one of the largest CCS solutions in the US for industrial emitters.The project spans around 100,000 gross acres across Chambers and Jefferson Counties in southeast Texas, and approximately 40,000 gross acres offshore Beaumont and Port Arthur.

“Delivering lower carbon solutions to harder-to-abate industries is fundamental to Chevron New Energies’ mission, and as a Southeast Texas native, I know how vital these industries are to our local communities and their economies,” Chris Powers, vice president of CCUS at Chevron New Energies, in the release. “We thank Carbonvert for its work on the project, and we look forward to Equinor bringing its expertise and resources to Bayou Bend as it joins the partnership.”

Each of the company's low-carbon innovation arms — Low Carbon Solutions at Equinor, Chevron New Energies division, and Talos Low Carbon Solutions division — are collaborating on the project.

“We continue to make significant progress in developing Bayou Bend, which we believe will be a premier regional carbon storage hub solution for Texas’ largest industrial region. Equinor is a welcomed addition to the partnership. Their experience and track record further enhance the joint venture, which is committed to developing safe, reliable, cost-effective lower carbon solutions while enabling continued economic growth,” said Robin Fielder, executive vice president – Low Carbon Strategy and Chief Sustainability Officer of Talos.

In 2021, Texas General Land Office in Jefferson County, Texas, selected Talos and Carbonvert for the carbon storage lease, located in state waters offshore Beaumont and Port Arthur, Texas. Chevron joined the JV in May 2022. The project expanded earlier this year.

The project is located in southeast Texas, about 70 miles outside of Houston. Image via equinor.com

Ad Placement 300x100
Ad Placement 300x600

CultureMap Emails are Awesome

Houston bio-based materials co. steps into new sustainable consumer products

a cleaner shoe

A more sustainable shoe can’t be built on a single material swap. From the hard plastics hidden inside a heel to the material covering a sneaker’s upper, footwear is a collection of components—and each presents a different challenge for companies trying to move away from conventional, petroleum-based materials.

Houston-based Rheom Materials wants to change that equation. The biomaterials company has launched a sustainable footwear platform featuring two of its bio-based alternatives: Benree, a biodegradable plastic designed for hard internal components, and ShoraiDura, a durable leather alternative for footwear uppers.

“A shoe is not one material; it is multiple parts working together as a system. Substituting a single material has never moved the needle,” Rheom founder and CEO Zimri Hinshaw said in a news release. “Rheom wants to make it easier for brands to make a positive impact. By providing an assortment of bio-based materials, brands can change the system, not just a swatch of it.”

Benree is Rheom’s alternative to conventional hard plastics used in footwear construction. The company says it is a 100 percent USDA-certified bio-based, biodegradable material with performance comparable to acrylonitrile butadiene styrene (ABS), a widely used engineering plastic.

The material has passed SATRA testing for high-heel applications with Bared Footwear, an Australian footwear brand.

“At Bared, we're constantly on a journey to remove plastic from our shoes. At the same time, our brand won't compromise on quality for the end customer,” Millie Richards, Bared’s head of sustainability, added in the release. “From samples and testing, Rheom has proven to be solving both of those problems for us. We look forward to seeing how they develop as a company and would love to use them in our shoes.”

Rheom says it is also exploring Benree for additional internal components, including toe puffs and heel counters.

Rheom's Benree material was used for a high-heel prototype. Photo courtesy Rheom Materials

The company’s ShoraiDura material addresses another major part of shoe construction: the upper, which must withstand repeated flexing, friction and wear while maintaining its appearance.

Containing about 80 percent bio-based content, ShoraiDura is engineered as a durable leather alternative for footwear. Rheom says the material’s molecular structure is designed to deliver the strength and durability required for demanding applications.

To demonstrate how the material could be used in finished products, Rheom worked with a Los Angeles-based footwear manufacturer to create two prototypes: an athletic sneaker and a textured skater shoe, both featuring ShoraiDura uppers.

The two offerings reflect the company’s broader strategy. Rather than asking brands to evaluate a single material in isolation, Rheom is positioning its platform as a way to explore alternatives across different parts of footwear construction.

The next step is broader industry adoption. Benree’s testing with Bared Footwear and ShoraiDura’s footwear prototypes offer early examples of how the materials could be applied, while commercial use will depend on manufacturers’ evaluations and product-development decisions.

Rheom Materials is a Houston-based biomaterials company developing bio-based alternatives to petrochemical plastics. Its product portfolio includes Shorai, a leather alternative, and Benree, a hard plastic alternative.

The company debuted Shorai at the Houston Livestock Show and Rodeo in 2025 and showed a bio-based "leather" collection in Milan earlier this year. Read more here.

---

This article originally appeared on our sister site, InnovationMap.

Houston solar manufacturer expands facility, production capacity

houston expansion

Solar tracking and manufacturing company PV Hardware USA is increasing its production capacity and expanding its Houston facility in an effort to meet growing demands.

The move marks the company's third expansion in the Houston area in three years. PV Hardware reports a 400 percent surge in national market growth over the past three years, as solar-based projects have been pivotal in energy resilience efforts.

PV Hardware plans to increase the capacity at its Houston facility by 42 percent, according to a news release. With the additional capacity, PV Hardware expects a 35 percent increase in production of pre-assembled parts. The company has not announced whether any additional employees will be hired or the costs of expansion.

In September, the company completed its new dedicated pre-assembly facility, which will help migrate difficult assembly into an easier manufacturing setting. The new pre-assembly area will also assist with streamlined field installation, enhanced schedule predictability and reduction of manual labor.

Citybiz reports that the expansion totals approximately 34,200 square feet.

PV Hardware USA aims to make solar installation more efficient. For large-scale solar projects, PV Hardware USA’s pre-assembly process helps to relieve assembly work done by installation teams. According to PV Hardware USA, it reduces the number of on-site components by 70 percent.

“Traditionally, manufacturers pushed the assembly burden onto the jobsite,” Rodolfo Bitar, vice president of business development for PVH USA, told Renewable Energy Magazine. “We ask a different question: what work can be done more efficiently before the equipment ever leaves the factory? By managing the assembly of 188 loose parts per row in our controlled manufacturing environment, we remove field complexity and make installation highly predictable.”

PV Hardware USA produces single-axis solar trackers made in Texas and has supplied over 52 gigawatts of solar trackers worldwide.

“The expanded presence in Texas underscores a long-term commitment: bringing world-class solar expertise to local American manufacturing, supporting communities, and serving as a reliable partner through the clean energy transition,” the company said in the release.

In July of 2025, the company opened its 95,000-square-foot facility, which was the second Houston location following its initial $30 million U.S. manufacturing facility, which, at 50,000 square feet, is one of America's largest solar tracker manufacturing facilities.

Gulf of Mexico marine life dramatically declined after BP spill, study says

Gulf Life

In a deep, dark part of the Gulf of Mexico, the number of marine animals plummeted by about 60% in the years following the 2010 Deepwater Horizon explosion, a new study found.

In a crucial part of the Gulf between the light surface and the darkest depths, where the BP-operated well failed and dumped 134 million gallons of oil, the number of fish found dropped by 63.5% from the year after the spill to 2015. Crustaceans, including shrimp and krill, a key food for whales, went down 62%, and larger animals like squid and octopuses fell 59.7%, according to a study published Monday in the journal PNAS.

And those populations haven't come close to recovering, the study found.

Researchers focused on the ocean's “twilight zone,” a vast area above the seafloor, where much of the surface marine life, including dolphins and whales, feast on creatures. Yet little is known about this gigantic ecosystem, and this region of the Gulf had not been studied before the 2010 spill, said study lead author Tracey Sutton, a biological oceanographer at Nova Southeastern University.

A 2011 post-spill exploration cited in the research, which used six sets of nets at different depths and acoustic sonar, gave scientists a good sense of how much sea life was in the area between the surface and 5,000 feet deep (1,500 meters). They returned to the same place with the same equipment three-and-a-half years later and found sea life was between one-third and one-quarter of what it was in 2011.

“We saw this big decline,” Sutton said. “The question was then why? So we looked at all of the natural variables we thought could account for it, namely temperature, oxygen supply and food. None of those vary with the decline. The event that did was the oil spill. So we think that’s the most likely cause of the decline.”

Researchers kept on sampling since 2015 and the low populations remained, with a slight rise in 2022 and 2023 that did not prove statistically significant or lasting, Sutton said.

Documenting the decline

Sutton's team documented the population declines with three different lines of evidence: what they caught in the nets, what their acoustic sonar found and genetic studies showing the species losing genetic diversity because of inbreeding.

A lot of marine life died instantly after the explosion, which killed 11 workers, and from nearly five months of leaking oil and gas. Those pollutants got stored in the eggs of survivors and subsequent generations of critters got more compromised and weaker, Sutton said.

BP spokesperson Paul Takahashi said the accident “forever changed” the company: “We have made many changes intended to help prevent an event like this from ever happening again.”

Both the oil and the dispersants used to clean the spill hurt fish, but in different ways, said study co-author Isabel Romero, a chemical oceanographer at the University of South Carolina. Oil is more toxic and an overall threat, but the dispersant breaks the oil into smaller droplets, increasing the exposure of animals that live in the deeper water column, she said.

Dispersants caused many problems, and new studies show that in future accidents, it would be better to avoid those chemicals and instead add agents that increase oil-munching microbes, said former National Science Foundation Director Rita Colwell, a University of Maryland environmental microbiologist who headed a 10-year, $500 million BP-funded program to study spill effects.

Sutton said his team couldn’t prove an exact causal link to the BP oil spill, but by eliminating the other possibilities and looking at the timing, it’s logically clear that the spill caused the problem.

The krill population dropped 72%. Lanternfish — odd fish with blue-green lights embedded over their bodies — are a third of what they used to be, Sutton said. The stunning but scary dragonfish — with sharp teeth, light organs and a lure attached to its head — also had big losses, he said.

“These are foundational species,” Sutton said. “They're the things most things eat. So it's no wonder that we had wholesale changes across the community.”

The inner ocean is more unknown than outer space

Scientists learned much about this unexplored area of the Gulf.

“One of our biggest findings from the whole thing is how connected the whole oceanic Gulf is from top to bottom because the animals move up and down,” Sutton said. “There are predators at the top that dive deep. Lots of things that are deep that come up at night. So the system is one very large pulsing system, rather than just a layered system like people might have thought beforehand.”

Outside scientists were especially bothered by where the spill damaged.

“We know more about space in some ways than we do about the inner ocean. Because we can’t see these regions, there is a tendency to assume everything is fine, but here we have a clear result showing that something went very wrong," Scripps Institution of Oceanography marine scientist Kaitlin Frasier said in an email.

Frasier, who wasn't part of the study released Monday, published a post-spill study in 2024 looking at Gulf of Mexico whales and dolphins, finding population drops as high as 83%.

“It’s shocking how a single failure in a drilling rig can have this vast and sustained impact over thousands of square kilometers, with little visible recovery over 13 years after the spill,” said Dalhousie University marine scientist Boris Worm, who wasn't part of the study. “It is important that we see this, because for the longest time these consequences were completely out of sight and out of mind.”

Worm and Colwell said this damage should be kept in mind as the world talks about deep-sea mining and increased oil drilling in deep waters.