Collide has rolled out RIGGS, a large language model for energy professionals. Photo via Getty Images

Houston-based Collide is looking to solve AI issues in the energy industry from within.

Co-founded by former oil roughneck Collin McLelland, the company has developed AI software for operators and field teams, shaped by firsthand oilfield experience. Its AI-native platform “retrieves and synthesizes data from authoritative sources to deliver accurate, cited, and energy-focused insights to oil and gas professionals,” according to the company.

“Oil and gas has a graveyard full of technology that was technically impressive and operationally useless,” McLelland tells Energy Capital. “The reason is almost always the same: the people who built it didn't understand what they were actually solving for. When you're an outsider, you see workflows and try to automate them. When you're an insider, you understand why those workflows exist—the regulatory constraints, the physical realities, the liability concerns, the trust dynamics between operators and service companies.”

Collide’s large language model, known as RIGGS, performed well in recent benchmarking results when taking a standardized petroleum engineering (SPE) exam, the company reports. The exam assesses understanding from conceptual terminology to complex mathematical problem-solving.

According to Collide, RIGGS achieved a score of 67.5 percent on a 40-question subset of the SPE petroleum engineering exam, outperforming other large language models like Grok 4 (62.5 percent), Claude Sonnet 4.5 (52.5 percent) and GPT 5.1 (4 percent).

RIGGS completed the test in 15 minutes, while Grok took two hours. Collide hopes over the next few months, RIGGS will receive a score between 75 percent to 80 percent accuracy.

The software could potentially help oil and gas companies produce accurate outputs and automate trivial workflows, which can open up valuable time for engineers and teams to work on other pressing matters, according to McLelland.

“Collide exists because we sat in those seats — we were the engineers, the operators, the field guys,” he says. ”RIGGS scoring higher on the PE exam versus the frontier labs isn't a party trick. It's evidence that the model understands petroleum engineering the way a petroleum engineer does, because it was built by people who do.”

RIGGS was trained on Collide’s Spindletop hardware and is supported by a vast library of information, as well as a reasoning engine and validation layer that uses logic to solve problems.

“Longer term, we see RIGGS as the intelligence layer that sits underneath every operator's workflow — not a chatbot you open in a browser, but something embedded in the tools engineers already use,” McLelland says. “The goal is to give every engineer the knowledge and pattern recognition of a 30-year veteran, on demand."

According to McLelland, Collide is already building toward reservoir analysis and production optimization, automated regulatory compliance (Railroad Commission filings, W-10s, G-10s), workover report generation, and engineering decision support in the field for near-term use cases. In March, Collide and Texas-based oil and gas operator Winn Resources announced a collaboration to automate the time-intensive process of filing monthly W-10 and G-10 forms with the Texas Railroad Commission, completing what’s normally a multi-hour task in under 30 minutes. Collide reports that Winn’s infrastructure now automates regulatory filings and provides real-time visibility into data gaps, which has reduced processing time by over 95 percent.

“Before Collide, I'd spend hours manually keying in filings,” Buck Crum, director of operations, said in a news release. “(In March), we had 50 wells to file and I was done in 20 minutes. It does the majority of the heavy lifting while keeping me in control. That human-in-the-loop approach saves meaningful time and gives us greater confidence in our compliance and reporting.”

Collide was originally launched by Houston media organization Digital Wildcatters as “a professional network and digital community for technical discussions and knowledge sharing.” After raising $5 million in seed funding led by Houston’s Mercury Fund last year, the company said it would shift its focus to rolling out its enterprise-level, AI-enabled solution.
Ad Placement 300x100
Ad Placement 300x600

CultureMap Emails are Awesome

UH study finds Gulf Coast best positioned for emerging carbon removal technology

coastal impact

The Gulf Coast is an ideal spot for deploying a new ocean-based carbon removal technology that uses seawater to capture and store carbon dioxide, according to a new study from the University of Houston.

The study was led by UH Cullen College of Engineering Professor Mim Rahimi and published in Nature’s Communications Sustainability journal. Abdelrahman Refaie, a PhD student at UH, authored the paper. It aimed to develop a plan for implementing an electrochemical marine carbon dioxide removal (e-mCDR) technology that treats seawater to increase the ocean’s ability to absorb and store carbon dioxide from the air.

Currently, oceans absorb about 30 percent of human-produced carbon dioxide emissions each year, according to UH, making it a great natural resource for carbon removal.

The team at UH scouted and analyzed 38 coastal facilities across the U.S.—including power plants, desalination plants, and liquefied natural gas (LNG) terminals—before determining the Gulf Coast as an attractive option. The South Hub, or the Gulf Coast along Texas and Louisiana, ranked the top-performing area for the technology due to the industrial infrastructure, affordable electricity, hydrogen transportation and storage networks.

Other regions like California and the Northeast also scored well due to their clean energy mix and carbon removal potential, according to UH.

“The South hub has one of the highest diversity factors between power plants, desalination and LNG,” Refaie said in a news release. “That means if, logistically, down the road LNG is not open for this implementation, then we have another option in the area. It reduces the risk factor.”

UH says the findings show how companies could commercialize the technology, which could boost coastal economies.

“The question we had wasn’t technical, rather, it was logistical in regard to implementation down the road,” Rahimi said. “This would be a roadmap if a company or the government wants to utilize this technology.”

Rahimi aims to increase awareness about e-mCDR technology and its potential impact. He recently discussed the ocean-centric carbon removal work with members of Congress in March at the Carbon to Sea’s 2026 Hill Day.

“I think faculty at the University of Houston can do more of this kind of work,” Rahimi said in a separate release. “Meeting with Members of Congress gives us a chance to help policymakers better understand the science and engineering happening at our university. That kind of engagement is an important part of moving new technologies forward. It also shows how the work we do on campus can have a real impact on communities beyond the university.”

Japanese company plans $357M solar manufacturing plant in Houston area

coming soon

Japanese solar manufacturing company TOYO Co. Ltd. plans to invest $357 million to bring a 1.5-gigwatt solar cell manufacturing facility to the Houston area.

TOYO’s latest state-of-the-art facility will be co-located at its existing solar module site in Humble, according to a news release from the company. It will produce heterojunction (HJT) solar cells, which are known to be more durable and efficient with a higher heat threshold.

TOYO reports that the new facility will create 400 full-time manufacturing jobs. The project is expected to be completed in 20 months, which includes an initial pilot production.

"Expanding into domestic cell manufacturing is the natural next step in our commitment to creating an integrated onshore solar supply chain from polysilicon to panels," Takahiko Onozuka, chairman and CEO of TOYO, said in the news release. "Co-locating 1.5 GW of HJT cell capacity at our Houston module site significantly optimizes our capital allocation and infrastructure spend.”

TOYO entered the Houston market in 2024 through its acquisition of a majority stake in Solar Plus Technology Texas LLC.

Earlier this year, it began producing solar modules at its 567,140-square-foot plant in Lovett Industrial’s Nexus North Logistics Park. At the time, the company said it planned to expand manufacturing capacity to 6.5 gigawatts.

"The new cell plant reflects TOYO's long-term strategy to build a fully FEOC-compliant domestic manufacturing platform focused on serving the needs of the U.S. utility-scale solar market," Rhone Resch, TOYO's chief strategy officer, added in the release. "By producing premium solar products in the United States, we will be well positioned to meet the market's evolving domestic content requirements while strengthening supply chain security and reliability. Looking ahead, we believe HJT is the optimal technology platform for integrating next-generation perovskite solar cells, which we expect will drive the next major advancement in solar conversion efficiency and support TOYO's long-term technology roadmap.”