ADVERTISEABOUT USSUBMIT A STORYSUBSCRIBETERMS OF USEPRIVACY POLICY
Visit our family of Brands

Houston cleantech startup Helix Earth lands $1.2M NSF grant

federal funding

Helix Earth's technology has the potential to cut AC energy use by up to 50 percent. Photo by Sergei A/Pexels

Renewable equipment manufacturer Helix Earth Technologies is one of three Houston-based companies to secure federal funding through the Small Business Innovation Research (SBIR) Phase II grant program in recent months.

The company—which was founded based on NASA technology, spun out of Rice University and has been incubated at Greentown Labs—has received approximately $1.2 million from the National Science Foundation to develop its high-efficiency retrofit dehumidification systems that aim to reduce the energy consumption of commercial AC units. The company reports that its technology has the potential to cut AC energy use by up to 50 percent.

"This award validates our vision and propels our impact forward with valuable research funding and the prestige of the NSF stamp of approval," Rawand Rasheed, Helix CEO and founder, shared in a LinkedIn post. "This award is a reflection our exceptional team's grit, expertise, and collaborative spirit ... This is just the beginning as we continue pushing for a sustainable future."

Two other Houston-area companies also landed $1.2 million in NSF SBIR Phase II funding during the same period:

  • Resilitix Intelligence, a disaster AI startup that was founded shortly after Hurricane Harvey, that works to "reduce the human and economic toll of disasters" by providing local and state organizations and emergency response teams with near-real-time, AI-driven insights to improve response speed, save lives and accelerate recovery
  • Conroe-based Fluxworks Inc., founded in 2021 at Texas A&M, which provides magnetic gear technology for the space industry that has the potential to significantly enhance in-space manufacturing and unlock new capabilities for industries by allowing advanced research and manufacturing in microgravity

The three grants officially rolled out in early September 2025 and are expected to run through August 2027, according to the NSF. The SBIR Phase II grants support in-depth research and development of ideas that showed potential for commercialization after receiving Phase I grants from government agencies.

However, congressional authority for the program, often called "America's seed fund," expired on September 30, 2025, and has stalled since the recent government shutdown. Government agencies cannot issue new grants until Congress agrees on a path forward. According to SBIR.gov, "if no further action is taken by Congress, federal agencies may not be able to award funding under SBIR/STTR programs and SBIR/STTR solicitations may be delayed, cancelled, or rescinded."

From Your Site Articles
Ad Placement 300x100
Ad Placement 300x600

CultureMap Emails are Awesome

Property Showcase

Houston scientists unveil faster, low-energy method to recycle lithium-ion batteries

Battery breakthrough

Rice University researchers have uncovered a more energy-efficient and faster way to recycle critical minerals from used lithium-ion batteries.

Traditional methods rely on high heat, long processing times and harsh chemicals to recover a small fraction of critical materials from batteries used in everything from smartphones to electric vehicles. However, the team from Rice's Department of Materials Science and Nanoengineering developed a process that uses a water-based solution containing amino chlorides to extract more metals in less time

The team published the findings in a recent edition of the scientific journal Small.

Simon King, a sophomore studying chemical and biomolecular engineering who completed this work as a summer research fellow at the Rice Advanced Materials Institute, served as first author of the study. He worked with corresponding authors Pulickel Ajayan, the Benjamin M. and Mary Greenwood Anderson Professor of Engineering, and Sohini Bhattacharyya, a research scientist in Ajayan’s lab.

By using a hydroxylammonium chloride (HACI) solution, the team achieved roughly 65 percent extraction of key battery metals in just one minute at room temperature, according to the study. The efficiencies grew to roughly 75 percent for several metals under longer processing times.

“We were surprised by just how fast the reaction occurs, especially without the involvement of high temperatures,” King said in a news release. “Within the first minute, we’re already seeing the majority of the metal extraction take place.”

By not requiring high temperatures or long reaction times, Rice predicts the process could have a major impact on cost and the environmental impact of lithium battery recycling. Additionally, the water-based HACI solution makes waste handling easier and lowers certain environmental risks.

In addition to extracting the materials, the team went on to demonstrate that the recovered metals could be recycled and reprocessed into new battery materials.

“A big advantage of this system is that it works under relatively mild conditions,” Ajayan added in the release. “That opens the door to more sustainable and scalable recycling technologies.”

Fervo IPO leads Houston energy transition headlines for April

Hot Topics

Editor's note: The top Houston energy transition news of the month includes Fervo's official steps towards an IPO and Houston universities teaming up for recycling innovation. Below are the five most-read EnergyCapital stories published April 16-30, 2026:

Fervo Energy officially files for initial public offering

Fervo Energy has officially filed for IPO. The Houston-based geothermal unicorn filed a registration statement on Form S-1 with the U.S. Securities and Exchange Commission on April 17 to list its Class A common stock on the Nasdaq exchange. Fervo intends to be listed under the ticker symbol "FRVO." Continue reading.

Fervo Energy adds former eBay CEO Meg Whitman, other leaders to board

As it prepares for a highly anticipated IPO, Houston-based geothermal power provider Fervo Energy has added four heavyweights to its board of directors. The most notable new board member is Meg Whitman, former CEO of eBay, Hewlett-Packard, and Spring-based HPE, and former U.S. ambassador to Kenya. She joined the Fervo board as lead independent director. Continue reading.

Tesla's EV Robotaxis officially launch in Texas' largest metros

Tesla’s Robotaxi service has taken to the streets of Houston. In a brief statement Saturday, April 18 on its X social media account, Tesla Robotaxi says the autonomous rideshare service just launched in Texas’ two biggest metro areas — Houston and Dallas. Continue reading.

Halliburton Labs names 4 new clean energy startups to incubator

Four new companies have joined Halliburton Labs, the incubator for early-stage energy and climate startups run by Houston energy giant Halliburton. Halliburton Labs provides the emerging companies with mentorship, industry connections, laboratory access and other resources as they work toward commercialization. Continue reading.

Rice, UH launch joint effort to accelerate plastics recycling solutions

Institutes at two Houston universities are joining forces to help position the city as a global leader in plastics recycling innovation. The Center for Energy Studies (CES) at Rice University’s Baker Institute for Public Policy and the University of Houston’s Energy Transition Institute (UH-ETI) have announced a strategic partnership that aims to develop real-world solutions for plastic recycling. Continue reading.

Houston-area plastics company debuts state-of-the-art headquarters

new hq

Ultra-high-performance plastics company Drake Plastics officially opened its new state-of-the-art, 140,000-square-foot manufacturing center and corporate office in Cypress last month.

Dubbed “Drake HQ, ” the new facility was built to align with Harris County’s clean energy goals and features a 1.3-megawatt solar generation plant designed to offset 50 percent of the plant’s power consumption.

The facility is designed as a “factory ranch,” and is intended to blend in with its natural surroundings. With the expanded campus, Drake says it looks to serve existing and new customers in the semiconductor, aerospace, energy and defense industries.

The new headquarters is designed as a "factory ranch" and features a solar generation plant to offset half of its power consumption. Photo via LinkedIn

“We are thrilled to open the doors of our new headquarters in the area where it all began,” Drake Plastics President Steven Quance said in a news release. “We are honored to have reinvested in the community that has supported our growth and success over the past three decades.”

Drake Plastics cut the ribbon on March 26 at the new facility, which also marked the company’s 30th anniversary in the Cypress area. The company launched in 1996 with four employees and has grown to employ more than 100 staff members, according to a LinkedIn post.

Drake Plastics is a globally recognized leader in ultra-high-performance polymer manufacturing and specializes in extrusion, injection molding, precision machining, machine building, engineering and distribution. According to the company, its new Cypress facilty is one of the largest in the world that processes these high-performance polymers.

View All Listings