UH's $44 million RAD Center is the first mass timber building on campus with a dramatically lower carbon footprint compared to other buildings of its kind. Photo via uh.edu.

The University of Houston recently completed assessments on year one of the first mass timber project on campus, and the results show it has had a major impact.

Known as the Retail, Auxiliary, and Dining Center, or RAD Center, the $44 million building showed an 84 percent reduction in predicted energy use intensity, a measure of how much energy a building uses relative to its size, compared to similar buildings. Its Global Warming Potential rating, a ratio determined by the Intergovernmental Panel on Climate Change, shows a 39 percent reduction compared to the benchmark for other buildings of its type.

In comparison to similar structures, the RAD Center saved the equivalent of taking 472 gasoline-powered cars driven for one year off the road, according to architecture firm Perkins & Will.

The RAD Center was created in alignment with the AIA 2030 Commitment to carbon-neutral buildings, designed by Perkins & Will and constructed by Houston-based general contractor Turner Construction.

Perkins & Will’s work reduced the building's carbon footprint by incorporating lighter mass timber structural systems, which allowed the RAD Center to reuse the foundation, columns and beams of the building it replaced. Reused elements account for 45 percent of the RAD Center’s total mass, according to Perkins & Will.

Mass timber is considered a sustainable alternative to steel and concrete construction. The RAD Center, a 41,000-square-foot development, replaced the once popular Satellite, which was a food, retail and hangout center for students on UH’s campus near the Science & Research Building 2 and the Jack J. Valenti School of Communication.

The RAD Center uses more than a million pounds of timber, which can store over 650 metric tons of CO2. Aesthetically, the building complements the surrounding campus woodlands and offers students a view both inside and out.

“Spaces are designed to create a sense of serenity and calm in an ecologically-minded environment,” Diego Rozo, a senior project manager and associate principal at Perkins & Will, said in a news release. “They were conceptually inspired by the notion of ‘unleashing the senses’ – the design celebrating different sights, sounds, smells and tastes alongside the tactile nature of the timber.”

In addition to its mass timber design, the building was also part of an Energy Use Intensity (EUI) reduction effort. It features high-performance insulation and barriers, natural light to illuminate a building's interior, efficient indoor lighting fixtures, and optimized equipment, including HVAC systems.

The RAD Center officially opened Phase I in spring 2024. The third and final phase of construction is scheduled for this summer, with a planned opening set for the fall.

Ad Placement 300x100
Ad Placement 300x600

CultureMap Emails are Awesome

6+ must-attend Houston energy transition events for May 2026

Mark Your Calendars

Editor's note: May is starting off strong with two of the month's largest events beginning on Monday, May 4: Enverus Evolve Conference and OTC. Mark your calendars and begin registering now.

May 4-6, 2026 — Enverus Evolve Conference

Staying ahead of the curve in the energy sector is critical. This conference is designed to equip energy leaders with foresight in the energy market, providing cutting-edge technological know-how, sessions and networking opportunities industry leaders, and offering practical guidance on how to apply technology to solve big problems.

This event begins May 4 at Marriott Marquis, Downtown Houston. Register here.

May 4-7, 2026 — OTC 2026

The world’s largest offshore energy technology event returns to Houston beginning May 4. Dr. Mohamed Irfaan Ali, president of the Co-operative Republic of Guyana, will officially open the 2026 Offshore Technology Conference, delivering the Opening Address on May 4. This year's event will be cover the theme of "Steering Offshore Energy Innovation into the Future," emphasizes the pivotal role oil and gas, along with other emerging offshore energy sources, will play in shaping a sustainable and energy-secure future.

This event begins May 4 NRG Park. Register here.

May 14, 2026 — Gulf Coast ASSP Energy Corridor Section Meeting

At this lunchtime session, Chris Garza will speak on “Demystifying Regulatory Frameworks.” This session provides a comprehensive overview of key regulatory requirements concerning air quality, water discharge, and land management. Attendees will gain actionable insights into permits, reporting obligations, pollution prevention planning, and hazardous waste management. This session demystifies regulatory frameworks and empowers businesses to meet their legal responsibilities while promoting a culture of environmental stewardship. Attendees are welcome to stay for lunch and networking after the session.

This event takes place May 14 at 960 Memorial City Way. Register here.

May 16, 2026 — Energy Valuation Conference

ASA Houston's 16th annual EVC brings together energy valuation professionals and industry thought leaders to present timely educational valuation topics, with a focus on valuation impacts in the transition of power generation from fossil fuel to non-carbon, renewables, sustainable energy

This event takes place May 16 at The Briar Club, and there will be a live webcast. Register here.

May 18-19, 2026 — Geothermal Transition Summit North America

This two-day summit serves as the meeting point for the geothermal and oil and gas industries and will focus on geothermal energy, including scaling plants and navigating state regulations. The event promises 40 expert speakers, 15 exhibition spaces, and networking opportunities with 250 industry decision makers.

This event begins May 18 at Norris Conference Center. Register here.

May 20-21, 2026 — ESF North America

ESF North America returns for its 5th edition, under the theme of “innovation and adaptation.” Attendees will explore how technology, innovation, and collaboration can drive a resilient, competitive refining and chemicals industry.

This event begins May 20 at The Westin Oaks Houston at the Galleria. Register here.

Houston scientists unveil faster, low-energy method to recycle lithium-ion batteries

Battery breakthrough

Rice University researchers have uncovered a more energy-efficient and faster way to recycle critical minerals from used lithium-ion batteries.

Traditional methods rely on high heat, long processing times and harsh chemicals to recover a small fraction of critical materials from batteries used in everything from smartphones to electric vehicles. However, the team from Rice's Department of Materials Science and Nanoengineering developed a process that uses a water-based solution containing amino chlorides to extract more metals in less time

The team published the findings in a recent edition of the scientific journal Small.

Simon King, a sophomore studying chemical and biomolecular engineering who completed this work as a summer research fellow at the Rice Advanced Materials Institute, served as first author of the study. He worked with corresponding authors Pulickel Ajayan, the Benjamin M. and Mary Greenwood Anderson Professor of Engineering, and Sohini Bhattacharyya, a research scientist in Ajayan’s lab.

By using a hydroxylammonium chloride (HACI) solution, the team achieved roughly 65 percent extraction of key battery metals in just one minute at room temperature, according to the study. The efficiencies grew to roughly 75 percent for several metals under longer processing times.

“We were surprised by just how fast the reaction occurs, especially without the involvement of high temperatures,” King said in a news release. “Within the first minute, we’re already seeing the majority of the metal extraction take place.”

By not requiring high temperatures or long reaction times, Rice predicts the process could have a major impact on cost and the environmental impact of lithium battery recycling. Additionally, the water-based HACI solution makes waste handling easier and lowers certain environmental risks.

In addition to extracting the materials, the team went on to demonstrate that the recovered metals could be recycled and reprocessed into new battery materials.

“A big advantage of this system is that it works under relatively mild conditions,” Ajayan added in the release. “That opens the door to more sustainable and scalable recycling technologies.”