Houston nuclear startup launches at CERAWeek, plans Texas facility

going nuclear

Mike Chilton is the CEO and founder of Fluxpoint Energy. Photo courtesy Fluxpoint

A new nuclear energy startup launched last month during CERAWeek in the Bayou City.

FluxPoint Energy, the new Houston- and McLean, Virginia-based company, plans to develop the nation’s first new uranium conversion facility in more than 70 years, an effort CEO and founder Mike Chilton says is critical to unlocking the next phase of nuclear energy growth.

"Policymakers, utilities, and developers increasingly point to fuel availability as a limiting factor for America's nuclear reactors—both present and future," Chilton said in a news release. "Uranium conversion has become an unacceptable chokepoint in a global supply chain still dominated by foreign providers."

Chilton has held leadership roles at Pegasus-Global Holdings and GE Verona Hitachi Global Nuclear Fuels. Rodrigo Gonzalez Arbizu serves as COO and Christopher J. Rimel as chief of staff. The Board of Advisors includes energy leaders, including Jeff Lyash, John Sharp, Jane Stricker, Jennifer Skylakos, Leo Weitzenhoff and Jay Wileman.

FluxPoint’s planned facility will convert uranium oxide into uranium hexafluoride (UF6). Although FluxPoit’s new facility is still far off, the company announced it had secured a site and completed both market and feasibility studies. The specific area has not been revealed, only that it will be in Texas.

Discussions at CERAWeek revolved around securing reliable sources of uranium.

Nuclear energy production has been stagnant or even in slight decline since the 1990s. Concerns about nuclear waste and safety, as well as prohibitive costs, have kept new plants from being built, while the widespread availability of cheap natural gas has made investing in nuclear power less profitable. Many see the technology as dangerous and outdated.

However, as energy crises become more common, companies like FluxPoint are looking to restart the nuclear energy sector. The industry got a boost under the Biden Administration thanks to the Inflation Reduction Act, which set goals of adding 35 gigawatts of new capacity by 2035.

Chilton participated in a panel on the best ways to ensure American nuclear plants have access to uranium, most of which is not mined in the United States.

"America cannot lead in nuclear energy while relying on foreign-controlled fuel processing," Chilton added. "FluxPoint was created to restore a critical piece of our nation's energy infrastructure—ensuring that U.S. reactors have access to a secure, domestic fuel supply. This is about energy security, economic strength, and global leadership."

From Your Site Articles

Last Energy will build a 5-megawatt reactor at the Texas A&M-RELLIS campus. Photo courtesy Last Energy.

Micro-nuclear reactor to launch next year at Texas A&M innovation campus

nuclear pilot

The Texas A&M University System and Last Energy plan to launch a micro-nuclear reactor pilot project next summer at the Texas A&M-RELLIS technology and innovation campus in Bryan.

Washington, D.C.-based Last Energy will build a 5-megawatt reactor that’s a scaled-down version of its 20-megawatt reactor. The micro-reactor initially will aim to demonstrate safety and stability, and test the ability to generate electricity for the grid.

The U.S. Department of Energy (DOE) fast-tracked the project under its New Reactor Pilot Program. The project will mark Last Energy’s first installation of a nuclear reactor in the U.S.

Private funds are paying for the project, which Robert Albritton, chairman of the Texas A&M system’s board of regents, said is “an example of what’s possible when we try to meet the needs of the state and tap into the latest technologies.”

Glenn Hegar, chancellor of the Texas A&M system, said the 5-megawatt reactor is the kind of project the system had in mind when it built the 2,400-acre Texas A&M-RELLIS campus.

The project is “bold, it’s forward-looking, and it brings together private innovation and public research to solve today’s energy challenges,” Hegar said.

As it gears up to build the reactor, Last Energy has secured a land lease at Texas A&M-RELLIS, obtained uranium fuel, and signed an agreement with DOE. Founder and CEO Bret Kugelmass said the project will usher in “the next atomic era.”

In February, John Sharp, chancellor of Texas A&M’s flagship campus, said the university had offered land at Texas A&M-RELLIS to four companies to build small modular nuclear reactors. Power generated by reactors at Texas A&M-RELLIS may someday be supplied to the Electric Reliability Council of Texas (ERCOT) grid.

Also in February, Last Energy announced plans to develop 30 micro-nuclear reactors at a 200-acre site about halfway between Lubbock and Fort Worth.

Ad Placement 300x100

Ad Placement 300x600

CultureMap Emails are Awesome

Property Showcase

Texas awards $73M for Houston-area grid resilience project

grid funding

Texas Gov. Gregg Abbott announced millions in funding for energy resilience projects around this state this week, with one major project set to impact the greater Houston area.

As part of the Texas Energy Fund's Outside of ERCOT Grant Program, the state announced a roughly $73 million agreement with the Sam Houston Electric Cooperative to replace and upgrade more than 9,000 electric poles and improve other equipment in Montgomery, Liberty and Hardin counties. The agreement is the first for the fund's Outside of ERCOT Grant Program, which supports state projects outside of the state's largest grid.

The multibillion-dollar Texas Energy Fund aims to "finance the construction, maintenance, and modernization of electric facilities across Texas." It was approved by voters in 2023. Other programs within the fund include the:

In-ERCOT Generation Loan Program
Completion Bonus Grant Program
Texas Backup Power Package Program

“The Texas Energy Fund delivers real results for Texans and strengthens the electric systems that families, businesses, and communities depend on,” Abbott said in a news release. “This grant to Sam Houston Electric Cooperative will replace thousands of vulnerable utility poles to better withstand severe weather and ensure a more reliable and resilient grid in East Texas.”

The Houston-area project, nicknamed Steel Anchor, is expected to be completed by June 2031. According to the release from the governor's office, the Sam Houston Electric Cooperative’s territory is one of the most hurricane-prone service areas in the state. The cooperative serves more than 38,000 Texas consumers

“Over the past decade, Sam Houston EC has strategically replaced poles to improve the strength of its electricity distribution system. This grant will boost the Cooperative’s ongoing grid-hardening and resiliency program,” Doug Turk, CEO of the Sam Houston Electric Cooperative, added in the release.

Following the announcement of the Sam Houston funding, Abbott's office also awarded another $200 million from the Outside of ERCOT Grant Program to upgrade approximately 700 miles of power equipment in Northeast Texas. The equipment is operated by Southwestern Electric Power Company, which serves more than 192,000 Texas consumers. The project will include improvements to 200 circuits, replacing aging copper wire with aluminum alloy conductors and replacing existing utility poles.

Additionally, the state announced its seventh Texas Energy Fund loan agreement for a 570 megawatt natural gas power plant in Sherman, Texas. The 20-year loan of up to $411 million is between the Public Utility Commission of Texas and Rayburn Electric Cooperative and is part of the fund's In-ERCOT Generation Loan Program. Rayburn will build the facility near its existing Rayburn Energy Station 1 in the Texoma region. It will connect to the ERCOT North Load Zone.

“When Texas voters overwhelmingly approved the Texas Energy Fund, they gave us a mandate to secure new, reliable power generation for Texas,” PUCT Chairman Thomas Gleeson added in a release. “The TxEF is delivering on that promise, and Rayburn Electric Cooperative’s new 570 MW power plant is proof. We are ensuring Texas families and businesses have power they can depend on for years to come.”

Solar manufacturer announces massive new facility in Houston area

coming soon

SEG Solar has announced plans to open a new 1.15 million-square-foot solar module facility in Tomball—its third in the Houston area.

The news comes just weeks after the Houston-based solar manufacturer announced its second facility, which will be located in Cypress. It’s expected to open in August.

The latest 4.6-gigawatt facility in Tomball will include an assembly factory and a warehouse. Construction is slated to wrap in March 2027, with commercial panel production planned to begin in May 2027. Once completed, the facility will bring SEG’s annual U.S. module manufacturing capacity to 10.6 gigawatts, according to a news release from the company, one of the largest totals in the country.

The facility will produce heterojunction technology (HJT) modules, which the company says will add to the number of n-type solar panels made in the U.S. HJT modules are known to be more durable and are well suited for hotter climates.

“Designed to support next-generation HJT technology and FEOC-compliant production, the facility ensures reliable, high-efficiency solar solutions,” Raymond Bailey, sales manager at SEG Solar, said in a LinkedIn post. “ Alongside upstream integration in Indonesia and potential U.S. cell manufacturing, we are strengthening supply chain resilience amid evolving trade policies.”

SEG opened its $60 million, 250,000-square-foot facility in Houston in 2024 to house its production workshops, raw material warehouses, administrative offices, finished goods warehouses, and supporting infrastructure. The continued expansion is part of SEG’s long-term goal of becoming one of the largest 100 percent U.S.-owned module manufacturers.

Houston chemical co. completes successful field trial of cleaner natural gas processing tech

successful trial

Houston-based Merichem Technologies has announced successful results from the field trial of its new hydrogen sulfide (H2S) removal technology in the Permian Basin.

The technology, known as ECOTREAT, removed more than 99 percent of hydrogen sulfide gas from natural gas streams, or “sour gas,” without producing solid waste during the month-long trial. It also showed sustained performance even when operating above the unit’s design capacity, according to a news release.

“The industry is continually seeking to reduce both the price and complexity of removing hydrogen sulfide from gas production, especially since oil production has shifted to increasingly sour sources, higher gas ratios, and higher water ratios,” Jeff Gomach, SVP, Merichem Technologies, said in a news release. “ECOTREAT met all its field trial objectives and provides a highly effective method for removing hydrogen sulfide to prevent equipment corrosion, ensure worker safety, meet environmental regulations, and maintain product quality for transport.

H2S found in natural gas can turn the gas toxic or hazardous and lead to corrosion in pipelines and processing equipment. However, standard H2S removal technologies create high levels of solid waste. ECOTREAT resolves many of those issues by using an aqueous-phase proprietary catalytic process that converts H2S into dissolved thiosulfate.

Next, Merichem says it plans to move the technology out of the pilot stage to full-scale commercialization.

Merichem, an 80-plus-year-old company, initially launched as a soap and industrial cleaning company. It eventually transitioned to focus on energy technology.

In 2024, Black Bay Energy acquired a portion of Merichem Process Technologies and Merichem Catalyst Products, which would become Merichem Technologies.

View All Listings

ENERGYCAPITALHTX EMAILS ARE AWESOME